Are tablets up to the task of accurate color testing?

Finally getting around to posting a follow-up to a follow-up to John The Math Guy’s recent series on color gamut size, colorblindness and tablet displays. I thought I might be able to at least shed a little more light on his question about the differences in color accuracy between some of these devices.

In his testing, John found no statistically significant difference in scores among different people taking the EnChroma colorblindness test on different devices. I found this somewhat surprising since, in my experience, even tablets with similar color gamuts tend to show colors with very different levels of accuracy.

iPad mini color gamut and Gretag Macbeth colors against sRGB in CIE1976

To show what I mean by that, I measured how two different tablets show the colors found in the Gretag Macbeth color checker chart.Nexus 7 color gamut and Gretag Macbeth colors against sRGB in CIE1976

As you can see, the iPad mini and Nexus 7 each produce very different colors, even for those colors that are actually inside their gamuts.

For example, even though the iPad mini has enough gamut coverage to accurately display the Gretag chart’s deepest blue, it cannot do so without distorting the image in another way. This is because of data in the underlying image standard- most content today is encoded in the sRGB standard. If the iPad were to show that Gretag blue correctly, it would not have enough color saturation headroom left over to show you a different color if a deeper blue, say right at the bottom of the sRGB triangle, were called for.

A good real world example of this can be found in the picture below of my bloodhound, Louisa, racing down the beach at Carmel, CA. The middle of the sky in this image is right on the edge of the iPad’s color gamut, very similar to the Gretag blue in the charts above, while the deepest blues found in the ocean fall outside the iPad’s gamut.

Out of gamut colors at beach

If the iPad were striving for accuracy at all costs, it might map both colors right on top of each other at the edge of the gamut. There’d be no visible difference between the two in this case and the quality of the image would suffer but at least the sky would be accurate. In order to avoid this scenario, the designers of these devices have decided to compromise on accuracy so they can show a full range of color differences to the user.

They do this by remapping colors inward, away from the edges of the gamut, effectively compressing the gamut even further so that otherwise out-of-gamut colors can be seen. This is a good solution given the gamut limitations of the device since it results in more pleasing, if less accurate images.

As newer devices trend towards wider color gamuts this kind of compromise should become a thing of the past. In fact, tablet designers may be working on the reverse issue- how to avoid oversaturating images that were encoded for smaller gamuts.

Great, how does this relate to colorblindness again?

iPad mini vs Nexus 7 color accuracy comparison in CIE 1976

iPad mini vs Nexus 7 color accuracy comparison in CIE 1976

Taking another look at the Gretag results from the two devices plotted on top of each other, there clearly are major differences. But, in the reds and greens, two colors associated with a common form of color blindness, the devices are relatively close. So, the simple answer may just be that colorblindness tests do not require pinpoint accuracy to be effective, at least as basic screening tools.

4 thoughts on “Are tablets up to the task of accurate color testing?

  1. It sounds like what you are talking about is a rendering intent when moving between gamuts. I’d be curious to know what the iPad is really doing. Nothing else in iOS appears to be color managed so I would be surprised to see it performing these kind of calculations to convert colors from sRGB into a native gamut. This is only because it seems like such a small step to go from this to actually supporting color profiles in images that I can’t imagine they would just do it all. Once (or if) iOS is legitimately color managed, the “reverse issue” of over-saturation due to wide gamut displays will, of course, go away.

  2. Hi Jeff, I am developing some Visual Sciences Apps and I would like to know if you have any reference where I can find information about CIE coordinates and Luminance level for different tablets measured by specroradiometers.

    Regards, and thank you for share your information

  3. Pingback: Use CMYK, RGB or sRGB for publishing to iPads and Android? | Planet Quark

Leave a Reply